NeedlePrint & Play Finishing

Let’s put the “Play” in NeedlePrint & Play!

One of my favorite parts of NeedlePrint & Play is the endless finishing options! When we unveiled the line to our wholesale customers we filled our booth with oodles of models! We used wood blocks, frames, banners, accordion chipboard, decorative clipboards, painter’s canvases. Because the edges of the paper don’t ravel– like linen does– you can trim the piece close to the edge and display it with “raw” edges! You can fit your piece onto whatever you can find!

Feel free to color outside the lines! We want you to be creative!

Want to know where to start?

Watch the video below and I’ll show you a few of the most basic NeedlePrint & Play finishes. I’ll also give you some tips for trimming your piece to fit onto a smaller object.

 

Watch this too!

Be sure to check out our first NeedlePrint & Play post/ video that shows you exactly what’s inside a kit and has more tips for stitching!

Candle Pan Finishing Tutorial

Finish It!

It’s time! As we prepare to release the fourth calendar floral in the [Chalk.Squared] series, we want to share a candle pan finishing tutorial. Now you can get January, February and March finished and in candle pans just in time to start stitching April!

What you’ll need…

We’ve made the finish simple by packing finishing kits with all the bits and pieces of supplies you’ll need for your project. You’ll need one kit per stitched piece. You’ll also need some lovely enameled candle pans –they are not included in the finishing kit. You can get them from Hands On Design.

You have two options for candle pans, you can get one candle pan and switch the designs in and out (they’re on magnets) or you can get enough candle pans to put each design in its own pan. You’ll see how it works in the video.

 

Want to get started stitching [Chalk.Squared]? See all the available designs here!

[ux_custom_products cat=”chalk-squared” products=”” columns=”4″ title=”Show me the Chalk!”]

I hope you enjoyed the video! Please feel free to email finishing questions to rachel@justanotherbuttoncompany.com.

You can follow along with the new designs on the [square.ology] facebook page!

[button size=”medium” style=”primary” text=”Be a Fan!” link=”https://www.facebook.com/square.ology/?ref=hl”]

Scare·ology!

We were inspired to create a Halloween mini-set of [square.ology], that we’re calling [scare.ology]…aren’t we clever?

We’re always looking for fun new finishing ideas for [square.ology] and we’ve definitely found a good one for Scare.ology! We teamed up with Retromantic Fripperies to make a special thread organizer and box that make these finished pieces to-die-for! The box and the thread organizer are hand painted black with have a rubbed wax finish. The edges are distressed which adds a touch of vintage flavor.

scare.ology cross stitch by Just Another Button Company and Hands On Design

 

Never.More Cross Stitch Chart

never.more cross stitch chart - Just Another Button Company

And Scary.Bit Cross Stitch Chart

scary.bit cross stitch chart

 

You can finish your stitching just like we did! Start by following our Flat Finish Tutorial to flat finish your stitching. Then attach to the box or the thread organizer with stitchery tape.

nevermore cross stitch chart - Just Another Button Company

The scare.ology box works with the never.more chart as it is optimized for a 4″ square design.

scary bit cross stitch chart - Just Another Button Company

 

 

The scare.ology thread organizer works with the scary.bit as it is optimized for a 2″ square design.

 

We hope you enjoy stitching and finishing scare.ology!

Cross Stitch Finishing Tutorial – Ahoy Frame

We’ve had lots of button fans ask about the frames we used to finish [square.ology] Ahoy. Today’s cross stitch finishing tutorial will share where to find them and how to finish them for your own Ahoy pieces. Before you start, you’ll want to read our Flat Finish Tutorial, it is the basis for all of our [square.ology] finishes and is a great finishing technique to have under your belt.

Now that you’ve read the Flat Finish Tutorial you’re ready to start finishing Ahoy! This cross stitch finishing tutorial shows how to finish the three 4″ x 4″ designs from Ahoy (Octopus Dance, Sail Around and Sandcastle Frame), however this will also work with any 4″ x 4″ [square.ology] design!

Follow the full tutorial below or download a PDF here.

Ready, Set, Finish!

Materials:

Any of the 4” designs from Ahoy stitched on 30 count linen

Matboard

Batting

Lacing thread (hand quilting thread or pearl cotton #8)

Stitchery tape (double-sided, acid free)

Acrylic paint

Tim Holtz Distress Ink

Art Minds 5 1/2” unfinished wood frame—from craft stores

 

Supplies:

Sharp sewing needles

Rotary cutter

Quilter’s ruler

Cutting mat

Box cutter

Iron & pressing surface

Scissors

[square.ology] flat-finish tutorial

Foam brush

Sandpaper

 

 

Instructions:

Prepare the Flat-Finished Squares:

  • Using the complimentary [square.ology] Flat-Finish Tutorial, flat finish your Octopus Dance, Sandcastle Frame or Sail Around stitching.
  • Sew any embellishments to your stitching with a sharp needle and matching thread.

Pick a Frame:

The original frames that are pictured on the chart were purchased from Hobby Lobby. The frame pictured at the beginning of this tutorial is from Michaels. Either of these frames (or others too!) will work, just be sure the wood is unfinished.  When picking a frame, take your flat finished stitching along so you can be sure the frame is big enough. Lay the flat finished piece on top of the frame to check that the edges of the frame show around the linen.

Paint the Frame:

Now comes the fun part —let’s play with paint!  I used  Sea Breeze Americana acrylic paint plus a few drops of white to achieve the color I wanted.

supplies for ahoy frame

  • Cut the twine hanger off of the frame at the knots. Cut carefully so you can tie this piece back on at the end.

ahoy frame tutorial

  • Use the foam brush to apply paint evenly to all of the frame’s edges, like the photo below. The  unfinished wood will absorb the paint.  There is no need to paint the middle section because it will be covered.

ahoy painted frame tutorial

  • Let the paint dry for about 15 minutes. Touch lightly with your finger to test dryness. If dry, apply a second coat of paint. This coat will take approximately 30 minutes to dry.

Distress the Frame:

  • Test the paint again with your finger to make sure it’s dry. If it is, then it’s time to sand the edges. Rub the edges with a small piece of sand paper to remove some of the paint from the curves to get a distressed look.

ahoy painted frame tutorial

Now we’ll distress the paint. I used Tim Holtz  Distress Ink—Frayed Burlap color.

ahoy frame tutorial

 

  • Take the ink pad and lightly sweep it across the paint. Don’t press it into the paint, just draw it across the surface so it brushes the frame.  It will look like this.

ahoy painted frame tutorial

  • Using  a Kleenex and moderate pressure with your fingertip, smudge the ink so that it is absorbed into the paint.

File Jul 07, 1 12 09 PM

Now it will look like this!

ahoy frame tutorial

Finish the Frame:

  • Retie the twine hanger onto the frame.

ahoy frame tutorial

  • Apply stitchery tape to the back of your flat finished square and remove the backing paper.
  • Position the flat finished square in the middle of the frame so that an even amount of the frame shows around all of the edges. Press firmly to apply the stitchery tape to the frame.

ahoy frame tutorial

 

Hang your finished frame in a prominent spot so you can look at it often and admire your handy-work!

I hope you enjoyed following our tutorial. While you’re here check out some of our other finishing tutorials–

 

Whimsy Pennant Banner

Whimsy

 

Bloom Bit Fob

 

©2015, Hands On Design, Just Another Button Company™    No permission is granted to reproduce these instructions or images for commercial purposes, although shops may distribute the instruction sheet as part of a class or tutorial featuring [square.ology] or other products by Hands On Design or Just Another Button Company.  Permission for other uses must be granted individually and in writing.  The instructions and images may not be published or shared electronically by shops or individuals. Instructions and images are property of Hands On Design and Just Another Button Company.

 

 

Cross Stitch Finishing Tutorial – Pennant Banner

Today we’re bringing you the third cross stitch finishing tutorial for square.ology. We hope you’re having fun following these finishing tutorials. We’re having lots of fun sharing our ideas with you. Follow this tutorial to make a pennant banner from our Whimsy Cross Stitch Charts. The full tutorial is shown below but you can also download a PDF here.

Materials:

[whimsy] design stitched on 30 count linen

Matboard (4 3/8” square)

Batting (4 3/8” square)

Lacing thread (hand quilting thread or pearl cotton #8)

Stitchery tape (double-sided, acid free)

Scrapbook paper

Paper Accents – Kraft Chipboard Pennants   (5” x 8”, available in craft stores)

White twisted cord—1/4” diameter

Scotch tape

JABC [square.parts]

 

Supplies:

Sharp sewing needles

Rotary cutter

Quilter’s ruler

Cutting mat

Scissors

Box cutter

X-acto Knife

Hole punch

Iron & pressing surface

Brown Sharpie

[square.ology] flat-finish tutorial

 

Prepare the Flat-Finished Square:

  • Using the [square.ology] Flat-Finish Tutorial, flat finish any of the 4” whimsy designs.
  • Sew any embellishments to the flat-finished piece using a small needle and matching thread.

Prepare the Paper Pennant:

  • Cut small pieces of stitchery tape and apply around the edges of a chipboard pennant. Remove the backing paper from the tape.

photo #1 - whimsy

  • Lay the pennant (tape-side-down) on the wrong side of your scrapbook paper. Press the pennant against the paper to make the tape stick.
  • Using an X-acto knife and cutting mat, trim the paper even with the edges of the chipboard pennant.

photo #2 - whimsy

  • Line up the hole punch with the holes in the chipboard and punch holes in the paper to match.

photo #3 - whimsy

  • Using a brown (or dark blue) Sharpie, color any visible edges of the chipboard.

 

Finish the Pennant:

  • Place the flat-finished stitching face-down. Put strips of stitchery tape along the edges and remove the backing paper.

photo #4 - whimsy

  • Arrange the flat-finished square on the paper side of the pennant according to the picture and press down to apply the tape to the paper.

photo #5 - whimsy

 

Finish the Garland:

  • Make more pennants with the other [whimsy] stitched pieces and extra ones by covering some pennants with just paper.
  • Tie a knot 12” from the end of your cord (adjust the 12” if you want a longer “tail” at the end of your banner).

photo #6 - whimsy

  • Lay the cord with the knot on the right and the unknotted end on the left. You will string from left to right. Wrap a piece of Scotch tape around the left end of the cord to make threading easier.
  • String the cord through the right hole of the first pennant, from the front to the back. Slide the pennant to the right until the hole meets the knot you made.

photo #7 - whimsy

  • Now thread the cord through the left hole, from the back to the front. Tie a knot right in front of the hole.

photo #8 -whimsy

  • Choose how much space you want to leave between this and the next pennant and then tie a knot at that point.
  • Repeat steps 4 & 5 until all of your pennants are threaded onto the cord.

 

Enjoy your [whimsy] pennant banner!

Whimsy

 

 

©2015, Hands On Design, Just Another Button Company™    No permission is granted to reproduce these instructions or images for commercial purposes, although shops may distribute the instruction sheet as part of a class or tutorial featuring [square.ology] or other products by Hands On Design or Just Another Button Company.  Permission for other uses must be granted individually and in writing.  The instructions and images may not be published or shared electronically by shops or individuals. Instructions and images are property of Hands On Design and Just Another Button Company.